Cookies policy

SPA-2X1GE-V2-RF

2pt Gigabit Ethernet Shared Port Adapter REMANUFACTURED

Inventory quantities are subject to availability and are not guaranteed until the order is placed.

The Cisco SPA-2X1GE-V2 is a 2-Port Gigabit Ethernet Shared Port Adapter, Version 2, designed to provide two Gigabit Ethernet ports for Cisco routers and switches. It is a successor to the original SPA-2X1GE and offers enhanced features and compatibility.

Product Compatibility: Compatible with Cisco Catalyst 6500 Series Switches, Cisco 7600 Series Routers, Cisco 12000 Series Routers, Cisco XR 12000 Series Routers, Cisco ASR 1000 Series Routers, Cisco CRS Carrier Routing System, and Cisco 10000 Series Routers.The Cisco SPA-2X1GE-V2 is a 2-Port Gigabit Ethernet Shared Port Adapter, Version 2, designed to provide two Gigabit Ethernet ports for Cisco routers and switches. It is a successor to the original SPA-2X1GE and offers enhanced features and compatibility.
Port Density: Provides 2 Gigabit Ethernet ports, usable as a combination of SFP and RJ-45 ports.

Physical Interfaces Supported:
Short wavelength (SX) SFP
Long reach/long haul (LX/LH) SFP
Extended distance (ZX) SFP
1000BASE-T SFP (copper)
Built-in RJ-45 ports
LED Indicators: Bicolor green and amber LEDs indicate SPA and port status, including power, initialization, operational status, and link status.

Features and Functions: Autonegotiation and full-duplex operation
802.1Q VLAN termination and 802.1ad QinQ (stacked VLAN) termination
Jumbo Frames support (up to 9188 bytes)
CLI-controlled online insertion and removal (OIR)
802.3x flow control
Layer 2 protocol filtering (BPDU, Cisco Discovery Protocol, VLAN Trunking Protocol)
Layer 2 access list (MAC address filtering)
Supports up to 4000 VLANs per SPA and 5000 MAC accounting entries
Per-port and per-VLAN byte and packet counters for various traffic and error types
Support for Ethernet over MPLS (EoMPLS), QoS, HSRP, and VRRP

Network Management: Managed via host-system CLI and SNMP with support for various MIBs including Entity-MIB, Cisco-entity-asset-MIB, FRU-control-MIB, alarm and sensor MIBs, IF-MIB, Etherlike-MIB, RMON-MIB, QoS MIB, MPLS-related MIBs, and Ethernet MIB/RMON.

Reliability and Availability: Supports online insertion and removal (OIR) of the SPA and field-replaceable SFP optical modules.

Physical Specifications:
Weight: 0.75 lb (0.34 kg)
Height: 0.8 in. (2.03 cm) (single height)
Width: 6.75 in. (17.15 cm)
Depth: 7.28 in. (18.49 cm)

Power Consumption: Approximately 13.1W for the 2-port Gigabit Ethernet SPA.

Environmental Specifications:
Storage temperature: -40 to 70°C (-38 to 150°F)
Operating temperature nominal: 0 to 40°C (32 to 104°F)
Operating temperature short term: 0 to 55°C (32 to 131°F)
Storage relative humidity: 5 to 95%
Operating humidity nominal: 5 to 85%
Operating humidity short term: 5 to 90%
Operating altitude: -60 to 4000 meters
Compliance and Agency Approvals: Includes UL 60950-1, CSA C22 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950, EN 60825-1, EN 60825-2, FCC Part 15-Class A, ICES 003-Class A, CISPR 22 Class A, and other EMC and safety standards.